PB Display Configurator App - Download

$0.00

PixelSigns Displays The Display Configurator app is used to setup and configure the Pixel Signs process bar displays. The app communicates to the display by connecting a Windows based PC to the serial port on the display. RS-232 or RS-485 can be used. PB-C main form provides a quick overview...


60 Watt 24 Volt DIN Rail Mount Power Supply

$52.50

Provides up to 2.5 amps at 24 volts (60 watts). Ideal DIN rail mounted power source for PixelSigns process bar (PB) displays. Plenty of extra power for sensors or loop transmitters.  Low Profile for Building Automation Output Adjust Range: 24-28V 60 Watt 24 Volt Output  Max Output Current: 2.5A Input...


30 Watt 24 Volt DIN Rail Mount Power Supply

$46.23

Provides up to 1.25 amps at 24 volts (30 watts). Ideal DIN rail mounted power source for PB25 and PB50 displays.  Low Profile for Building Automation Output Adjust Range: 24-28V 30 Watt 24 Volt Output  Max Output Current: 1.25A Input Voltage Range: 85-264VAC, 120-373VDC Input Frequency: 47 - 63Hz High...


PB Display Surface Mount Kit

$17.25

Surface mount brackets attach to the sides of a PB25, PB50, or PB100 display to provide easy mounting to most surfaces. Detailed dimensions and mounting hole locations are available in the Process Bar Display manual.  Kit includes four brackets, four screws and four nuts. All components are stainless steel.


PB Display Panel Mount Kit

$3.00

Adds panel mounting capabilities to any PixelSigns process bar display. Screws slide into the slots on the sides and back of the display so they can be easily position for your application. Maximum panel thickness is 0.31 inches (8mm). Panel mounting details are available in the Process Bar Display manual. ...


PB25 Legend Support Kit

$9.30

Add custom legends to the left or right side of a PB25 display. Design and layout legends specifically for your application then print on weatherproof vinyl labels using your standard laser or inkjet printer. Kit includes one PB25 legend support, two mounting screws, and two mounting nuts.  Supports slid into...


PB50 Legend Support Kit

$12.80

Add custom legends to the left or right side of a PB50 display. Design and layout legends specifically for your application then print on weatherproof vinyl labels using your standard laser or inkjet printer. Kit includes one PB50 legend support, two mounting screws, and two mounting nuts.  Supports slid into...


PB100 Legend Support Kit

$19.30

Add custom legends to the left or right side of a PB100 display. Design and layout legends specifically for your application then print on weatherproof vinyl labels using your standard laser or inkjet printer. Kit includes one PB100 legend support, two mounting screws, and two mounting nuts.  Supports slid into...


PB Legends Over-laminate Tape

$9.00

This tough clear tape makes your PB legends chemical and abrasion resistant. After applying your custom printed legends add this clear over-laminate to increase the legend durability. UV and weather resistant.  45 feet x 1 inch roll. Use with PB25, PB50, and PB100 display legends.


PD Display 2" Pipe Mount Kit

$6.90

Kit includes 2 galvanized steel pipe clams and stainless steel mounting screw and nuts. Clamps can be attached to the sides or back of PixelSigns process bar displays.


PD Display 1-1/2" Pipe Mount Kit

$6.25

Kit includes 2 galvanized steel pipe clams and stainless steel mounting screw and nuts. Clamps can be attached to the sides or back of PixelSigns process bar displays.


PD Display 1" Pipe Mount Kit

$5.75

Kit includes 2 galvanized steel pipe clams and stainless steel mounting screw and nuts. Clamps can be attached to the sides or back of PixelSigns process bar displays.


PD Display 3/4" Pipe Mount Kit

$5.40

Kit includes 2 galvanized steel pipe clams and stainless steel mounting screw and nuts. Clamps can be attached to the sides or back of PixelSigns process bar displays.


Screwdriver - Precision Slotted 2mm Blade

$6.69

Works great with the PixelSigns process bar displays, DIN mounted modems and DIN mounted RS-485 converter field screw terminal blocks. Blade width is 2mm.


PB Display Wire Terminal Cover - Gland Seal

$10.00

PB display field wire terminal block cover with wire gland seal. Includes the wire gland fitting, cover, screws, and O-ring seal. Compatible with the PB25, PB50, and PB100 displays. Seals cables from 0.197 to 0.354 inches in diameter. Displays include either the gland seal fitting or 1/2" female NPT fitting....


PB Display Wire Terminal Cover - NPT Wire Fitting

$21.50

PB display field wire terminal block cover with female 1/2" NPT fitting. Includes the NPT fitting, cover, screws, and O-ring seal. Compatible with the PB25, PB50, and PB100 displays. Displays include either the NPT fitting or a gland type wire seal fitting.