Featured
Field Tools Loop Power
$120.00The Field Tools Loop Power provides portable power to loop-powered 2-wire transmitters for commissioning and testing. It's a fully contained power source that takes the low voltage from three "AAA" alkaline batteries and increases it to a highly filtered 24 volt power source. Loop Power is easy to use, includes...
Gas Spot Sampling Valve
$1,250.00The SSV Spot Sampling Valve maximizes natural gas spot sampling repeatability and accuracy while simplifying the sampling process. It fits between the sample probe and sample cylinder and includes the liquids separator, bypass vent valve, fill & empty valve, and extension tube pigtail with flow regulating port - recommended by...
MicroLink-HM HART Protocol Modem + Modbus Accumulator, RS-232 Interface
$336.00MicroLink-HM RS-232 is a managed HART modem that can be used as a primary or secondary HART host interface - eliminating the need for external carrier detect (CD) monitoring and request-to-send (RTS) control. It can also be configured to continuously poll up to 16 HART devices, filling internal Modbus registers...
MicroLink-HM HART Protocol Modem + Modbus Accumulator, RS-485 Interface
$336.00The MicroLink-HM RS-485 is a managed HART modem that can be used as a primary or secondary HART host interface - eliminating the need for external carrier detect (CD) monitoring and request-to-send (RTS) control. It can also be configured to continuously poll up to 16 HART devices, filling internal Modbus...
InLink-HM OEM HART Protocol Modem with Modbus Registers
$138.00InLink-HM is a complete HART modem module that can be used as a primary or secondary HART host - eliminating the need for external carrier detect (CD) monitoring and request-to-send (RTS) control. It can also be configured to continuously poll up to 16 HART devices, filling internal Modbus registers with...
MicroLink-HM+ USB/RS-485/RS-232 HART Modem with Modbus Accumulator
$384.00MicroLink-HM+ is a HART® protocol modem to USB/RS-485/RS-232 serial interface. In addition to functioning as a HART protocol modem, it can also be configured to continuously poll HART devices, filling Modbus registers with device values without any additional HART software. Modbus registers can be read using standard Modbus-RTU command 3...
Field Tools Loop Tap
$29.00Loop Tap makes connecting to 2-wire 4-20 mA current loop devices easy and simple. Commission and calibrate your devices faster with increased reliability by eliminating test leads and alligator clips from your test setup. Loop Tap includes the loop resistor and modem clip points so attaching your HART protocol modem...